Night Owl 6/Night Owl's Shareware - PDSI-006 - Night Owl Corp (1990).iso/049a/jabr11.zip/JABBER.CFG

Text File | 1992-01-25 | 10KB | 369 lines

               ──────────────────────────────────────────
                 ▄   │┌─┐├─┐├─┐┌─┐┐─┐ QWK Reader v1.1 ▄
                   └─┘└─└└─┘└─┘└──└       Shareware
               ──────────────────────────────────────────

                           Configuration File

       Configuration items must be enclosed in curly braces, anything
               outside of the curly braces will be ignored.

            (C)Copyright 1991,1992 Marcos Della and Shad Muegge
                          All Rights Reserved

        ┌──────────────────────────────────────────────────────────┐
        │    (Press F1 for help with the internal Jabber Editor)   │
        │ Important:  Edit the directories below before continuing │
        └──────────────────────────────────────────────────────────┘

                       [CONFIGURATION ITEMS BELOW]

   NOTE: Any item that is preceded by the "*" character will not be
         changed when this file was edited using the ALT-G option.
         You must reload Jabber for these lines to take effect.

   ┌──────────────────────┐
   │ Directory Parameters │█
   └──────────────────────┘█
    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀

        All of these directories must exist.

Directory where QWK packets are stored.
 * {QWKDIR=C:\JABBER}

Directory where REP packets are to be stored.
 * {REPLYDIR=C:\JABBER}

Directory for the storage system.
 * {STORAGEDIR=C:\JABBER}

Directory where the working directory will be created.
 * {WORKDIR=C:\JABBER}

   ┌─────────────────┐
   │ File Parameters │█  NOTE:  These files will default to the directory
   └─────────────────┘█         that Jabber was executed from if no path
    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀         specification is given.

Save filename
   {SAVEFILE=C:\JABBER\JABBER.CAP}

Twit filename
   {TWITFILE=C:\JABBER\TWITLIST.TXT}

Tagline filename
 * {TAGFILE=C:\JABBER\TAGLINES.TAG}

Correspondence logging filename
 * {LOGFILE=C:\JABBER\JABBER.LOG}

   ┌─────────────────┐
   │ Swap parameters │█
   └─────────────────┘█
    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀

Swap JABBER to memory/disk on DOS exit (Yes/No)
   {SWAP=Yes}

Use EMS memory for swapping (Yes/No)
   {SWAPEMS=Yes}

Drive and directory to store swap file (blank = default directory)
   {SWAPDRIVE=C:\JABBER}

   ┌────────────────────────┐
   │ External Program Files │█
   └────────────────────────┘█
    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀

External editor (blank = internal editor)
   {EDITOR=}

  Note:  If you want to edit two files, you need to put two ! ! as
  your filename.  See JABBER.DOC for more details on external editors.

File lister program
   {LISTER=TYPER !}

   ┌──────────────────────────┐
   │ Quote & Reply parameters │█
   └──────────────────────────┘█
    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀

Set QUOTEFILE and REPLYFILE to different names if your editor can edit
two files at once.

Filename of quote file
   {QUOTEFILE=REPLY.MSG}

Filename of reply file
   {REPLYFILE=REPLY.MSG}

Insert quote into REPLYFILE
   {QUOTE_REPLY=No}

Truncate quoted text instead of reformatting
   {QUOTE_TRUNC=No}

External program to process quote before editing
   {PREPROCESS=}

External program to process reply after editing
   {POSTPROCESS=}

Insert header into quote (Yes/No)
   {REPLYHEADER=No}

Quote string for RELAY network
   {QUOTE_RELAY= │ }

Quote string for FIDO network (ASCII < 128)
   {QUOTE_FIDO= > }

How to handle taglines (Query)
   {TAG_QUERY=Last}
       Random : Automatically inserts a random tag
       Never  : Never inserts a tagline
       First  : Ask for tag before editing
       Last   : Ask for tag after editing
       Both   : Ask for tag both times

Insert initials in quoted message:
   {INITIAL_STYLE=First}
       First : Only the first line of reply
       Every : Every line of the reply
       None  : Do not insert initials

Force fido tagline style (Yes/No/Auto)
   {FORCEFIDO=AUTO}

   ┌──────────────────────────────────────────────────────────────────────┐
   │ Storage system parameters.  The storage system is a powerful system  │█
   │ for maintaining a history of QWK files.  Complete information on its │█
   │ use is contained in the manual.                                      │█
   └──────────────────────────────────────────────────────────────────────┘█
    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀

Storage system (Yes/No)
 * {STORAGE_SYS=No}

Maximum number of storage files per BBSID
 * {EXPIRE_FILES=7}

Maximum number of days to keep a storage files
 * {EXPIRE_DATE=14}

   ┌──────────────────────────┐
   │ Function Key Definitions │█
   └──────────────────────────┘█
    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀

The external functions are available (EXTERN_1 to EXTERN_10)
with the following parameters (See DOC file for more details):

        C0 - Don't clear the screen
        C1 - Clear the screen (default)
        D0 - Use COMMAND.COM on exit (specifies the /C option)
        D1 - Load Direct (Default)
        S0 - No Swap
        S1 - Use current Swap params (Default)
        S2 - Swap out Jabber

   {EXTERN_2=DIR /W /P,D0,C1}
   {EXTERN_3=C:\COMMO\COMMO.COM,S2}
   {EXTERN_10=MORE < JABBER.DOC,D0}

Currently, EXTERN_2 through EXTERN_10 are bound to the F2-F10 keys.
EXTERN_1 is undefined.

   ┌────────────────────────────────┐
   │ External Compression Utilities │█
   └────────────────────────────────┘█
    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀

Create a .ZIP file
   {ZIP=PKZIP !}

Pull apart a .ZIP file
   {UNZIP=PKUNZIP -o !}

Create a .ARC file
   {ARC=PKPAK -a !}

Pull apart a .ARC file
   {UNARC=PKUNPAK -r !}

Create a .LZH file
   {LZH=LHA a -m !}

Pull apart a .LZH file
   {UNLZH=LHA x !}

Create a .ARJ file
   {ARJ=ARJ a !}

Pull apart a .ARJ file
   {UNARJ=ARJ e -y !}

   ┌─────────────────────────────────────────────────────────┐
   │ Sounds - The first parameter defines the sound in Hertz │█
   │ The second defines the sound duration in Milliseconds   │█
   └─────────────────────────────────────────────────────────┘█
    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀


Allow ANSI music to play in 'V'iew mode
   {ANSIMUSIC=Yes}

All Error Screens
   {S_ERROR=250,150}

When you switch between conferences
   {S_CONF=1000,5}

When you are at the conference limits
   {S_CONF_EOF=420,150}

Search item not found
   {S_SEARCH=700,75}

   ┌─────────────────┐
   │ Printer Options │█
   └─────────────────┘█
    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀

Where to send printer output (PRN/LPT1/LPT2/FName)
   {PRINTER=PRN}

Send a formfeed after printing (Yes/No)
   {PRINTER_FF=YES}

   ┌──────────────────┐
   │ Colors & Display │█
   └──────────────────┘█
    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀

Message header order (T = To, F = From, S = Subject)
   {MESG_HEADER=TFS}

Force mono color set (Yes/No)
*  {MONO=NO}

Start up 43/50 (EGA/VGA) line mode (Yes/No/Auto)
*  {EGA/VGA=AUTO}

Default ANSI display delay value (milliseconds)
   {ANSIDELAY=10}

Default sorting order (Number, Subject, To, From, Date)
   {SORT_ORDER=Subject}

Include searches for ROT13
   {SEARCH_ROT13=Yes}

   ┌───────────────────────────────────┐
   │ 0 - BLACK        8 - DARKGRAY     │█
   │ 1 - BLUE         9 - LIGHTBLUE    │█
   │ 2 - GREEN        A - LIGHTGREEN   │█
   │ 3 - CYAN         B - LIGHTCYAN    │█
   │ 4 - RED          C - LIGHTRED     │█
   │ 5 - MAGENTA      D - LIGHTMAGENTA │█
   │ 6 - BROWN        E - YELLOW       │█
   │ 7 - LIGHTGRAY    F - WHITE        │█
   └───────────────────────────────────┘█
    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀

Status line colors
   {C_STATUS=70}

Status line highlight
   {C_STATUS_H=7E}

To field colors
   {C_TO_L=0E}

To field highlight colors
   {C_TO_H=0C}

From field colors
   {C_FROM_L=0E}

From field highlight colors
   {C_FROM_H=0C}

Subject field colors
   {C_SUBJECT=0E}

Date, number and status field colors
   {C_DATE=0E}

Header label colors
   {C_HEADER=0F}

Line editor colors
   {C_EDIT_L=1E}

Line editor highlight colors
   {C_EDIT_H=1F}

Registration information box colors
   {C_REGISTER=0F}

Main body text colors
   {C_TEXT=1F}

Highlight text items (search matches)
   {C_TEXT_H=4E}

Color to highlight quoted strings
   {C_QUOTE=1E}

Prompt window colors
   {C_WINDOW=4F}

Prompt window input colors
   {C_WINDOW_I=1E}

Help screen colors
   {C_HELP=0F}

Selector bar colors
   {C_SELECTOR=4F}

Color of Tagline stealer
   {C_GRABTAG=07}

   ┌────────────────────────────┐
   │ Internal Editor parameters │█
   └────────────────────────────┘█
    ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀

Clear input line if not cursor motion
   {CLEARINPUT=Yes}

Start in split screen mode
   {EDIT_SPLIT=No}

Position to do automatic word wrap
   {EDIT_MARGIN=75}

Editor text color
   {C_EDIT_TEXT=1F}

Block color
   {C_EDIT_BLK=70}

Split line color
   {C_EDIT_SPLIT=70}

End-Of-File marker color
   {C_EDIT_EOF=1C}

Status line color
   {C_EDIT_STATUS=70}

Search/Replace highlight color
   {C_EDIT_HIGH=4E}